Welcome To ComfortStar! Sign In or Create an Account

Multi-zone

Multi-Zone Flex Mount

Multi-zone - A single outdoor condensing unit can power up to 5 different indoor evaporators. There are more than 350+ possible combinations ranging from 9,000 BTU to 24,000 BTU in high-wall mounts and light commercial units which make it very flexible for contractors in the designing of the system.

 

Multi-Zone Flex Mount

Multi-zone systems allow for a flexible solution to individual zone comfort. Connecting up to 5 indoor units to a single outdoor unit reduces installation space, labor and costs while maximizing comfort and energy efficiency.
 
Multi-Zone Flex Mount

 

  • Flexible design – allows for up to 5 indoor units.
  • Choose from 4 different indoor evaporators – high-wall mount, cassette type, fan coil and floor ceiling.
  • Simple installation.
  • All indoor units can be controlled individually.
  • Connect 2 to 5 indoor units depending on capacity.
  • Capacity up 48,000 BTU!
  • More than 98 possible combinations.
  • Energy Efficient – up to 22.5 SEER.
New low ambient kit allows for heating in ambient temperature as low as -13°F

Flex Mount

  • Low Ambient: Systems are capable of producing comfort heating to ambient outdoor temperatures as low as -13°F.
  • WIFI: (field optional with additional WIFI kit) Control your indoor unit using your smart phone mobile device.
  • Manual Switch: Power unit ON/OFF using manual switch button located at the evaporator.
  • Centralized Control: Control up to 64 units using one wired central control. Front Desk Control (hotel application) overrides remote control at the evaporator.
  • Interactive Display:
    • Display shows error codes based on system failure.
    • Display also alerts when unit goes into auto defrost.
  • Bypass Mode: Unit will continue to operate if a non-critical component fails, such as a sensor.
  • Self-Diagnosis: unit will shut down and go into protection if it detects abnormalities. The display will show an error code depending on the type of protection the unit is in.
  • 2-Way Draining: Option to place drain hose on left or right hand side of evaporator makes for flexible installation design (only for high wall mount and floor ceiling). 
  • 3 Directional Airflow: Air flow is directed so that it reaches more surface area including the corners of the room being conditioned.
  • Refrigerant Leak Detection Error Code: Error code is displayed at the indoor unit if there is a leak detected in the system.
  • Mute Operation: Silence beep from remote control.
  • Follow Me Function: Remote control has a sensor built in. In this mode, the unit will take the temperature at the remote control instead of at the evaporator for the air return (room ambient) temperature.
  • Connect up to 5 zones
  • Individual Zone Control
  • High Efficiency Inverter Technology
  • Mix & Match 4 Different Indoor Units. Available Indoor Units: High Wall Mount, Cassette, Floor Ceiling and Fan Coil. 

Multi-zone Flex-mount

Set Descending Direction

18 items

Set Descending Direction

18 items